Operation Manual

5.7 User Management Configuration
This tab allows you to add normal or advanced users. To add user and set up user authority:
Step 1: Enter into MenuSetupUsers. Refer to Fig 5-27:
Fig 5-27 User Management Configuration
Step 2: Click Add button to display a dialog box as Fig 5-28:
Fig 5-28 Add-General
Step 3: In General tab, input username, password and select user type. You can also check “Binding PC
MAC Address” and input this address.
Step 4: Click “OK” to save the setting.
Note: When the default value of binding PC MAC Address is 0, the user is not bound with the
specified computer. If the bind option is used, the user would be able to log into the NVR only
through the specific computer (carrying the MAC address).
Step 5: Select Authority tab and then assign the operation rights for particular user. Refer to Fig 5-29.
Step 6: Click OK to save the setting.