User manual

AHD DVR User Manual
12

Fig4‐3AddDevice

ToaddIPcamerasviaWAN:
Step1:PleaseenterMenuIPCameratab.RefertoFig4‐1.
Step2:Click“Add”buttontopopupawindowsimilartoFig4‐3.Youneedtocheck“Enable”box,select
channel,manufacturerandproductmodelandmanuallyinput
IPaddress,serverport,usernameand
passwordofthisdevice.

Note:IftheNVRandtheIPcamerasyouwanttoaddarebothinWAN,theIPaddressoftheIPcamera
inputheremustbeWANIP.YoushouldforwardtheLANIPaddressandportoftheIPcamerainthe
routeranduseitsWANIPaddress,providedthattheIPcameraisinlocalareanetwork,otherwise,
theNVRcannotconnectthisIPcamera.

5 MainMenuSetupGuide
ClickrightmouseorpressFN/ESCbuttononthefrontpanelandthenthecontrolbarwilldisplay
atthebottomofthescreen.RefertoFig4‐1.


Fig4‐1MainMenuToolbar

ScreenMode:Clicktoselectscreenmode.Clicktheiconbesidethescreendisplaymode
toselectchannels.Imagescandragtoanyplacetodisplayintheliveinterface.
Dwell:Dwellmeanstodisplayliveimagesfromdifferentcamerasinasequence.Theimagesmay
bedisplayedasa
singlechannelorina gridfashionfromdifferentcameras. Dwell modeis
enabledonlywhenthechosendisplaymodeisnotabletodisplayalltheavailablecameras.
Color:Ifthisbuttonisenabled,youcanadjustthecoloroflivepictures.
E‐Zoom:Singlechannellargescreenelectronic
amplification.