User manual

AHD DVR User Manual

andtime(dayornight),youcanadjustitsvalueaccordingtothepracticalconditions.Left

clickthegridanddragtodeletearea.Clickicontosetthewholeareaasdetection

area.Clickicontoclearthesetdetectionarea.Clickicontotestthesensitivity

asperthelocalconditions.Oncemotionissensed,itdisplaysafigureicon.Click

icon,tosavethesetting.Clickicontoexitthecurrentinterface.



Note:Priortosettingmotiondetectionfielditisrecommendedthatyouclick  icon

tocleartheexistingfieldandsetafresh.



⑧ Select“All”tosetthesamesettingsforallchannels.

⑨ Click“Apply”buttontosavethesetting.

⑩ GotoScheduletab.Thesettingstepsforscheduleformotionbasedalarmaresimilarto

normalschedulesetup(seeChapter4.4.1formoredetails).



5.5.2VideoLoss

ThisDVRcanbesetuptodetectvideoloss.Thesettingstepsareasfollows:

① GotoMainMenuSetupAlarmVideoLoss.RefertoFig4‐20.

② Thesetupstepsofvideolosstriggeraresimilartomotiontriggersetting.(SeeChapter

4.5.1MotionTriggersettingformoredetails).



Fig4‐20AlarmCon figuration‐VideoLoss



5.5.3OtherAlarm

ThistabgivesachoicetoconfigurealarmforDiskFull,IPConflict,theDisconnectevent,Disk

AttenuationorDiskLost.

① GotoMainMenuSetupAlarmOtherAlarm.RefertoFig4‐21.

② Usethedropdownmenuandselecttheeventorthealarm.

③ Checktherequiredtriggeroptions.

④ Iftheselectedeventis“DiskFull”,thenusethedropdownboxfor“DiskShortageAlarm”

tochooseathresholdvalueforremainingHDDspace.Ifthethresholdvalueisreached,