User's Guide

Error! AutoText entry not defined. Error! AutoText entry not defined. User Guide
14
)
Note:
If you select Client mode in Figure 4-10, the wireless status in Figure 4-3 will change, similar to the
figure below:
4.3 WPS
WPS (WiFi Protect Setup)can help you to quickly and securely connect to a network. This section
will guide you to add a new wireless device to an existing network quickly by function. The WPS
function is only available when the Operation Mode is set to Access Point and Multi-SSID. Here
we take the Access Point mode for example. Select menu “WPS”, you will see the next screen
shown in Figure 4-4.
Figure 4-4 WPS
¾ Operation Mode - Displays the current operation mode of the device.
¾ WPS Status - To enable or disable the WPS function here.
¾ Current PIN - The current value of the device's PIN is displayed here. The default PIN of the
device can be found in the label or User Guide.
¾ Restore PIN - Restore the PIN of the device to its default.
¾ Gen New PIN - Click this button, and then you can get a new random value for the device's
PIN. You can ensure the network security by generating a new PIN.
¾ Add device - You can add a new device to the existing network manually by clicking this
button.