User's Guide

Error! AutoText entry not defined. Error! AutoText entry not defined. User Guide

¾ Enable SSID Broadcast - Select or deselect this check box to allow or deny the device to

broadcast its name (SSID) on the air. If it’s allowed, when wireless clients survey the local

area for wireless networks to associate with, they will detect the SSID broadcast by the

device.

)

Note:

1. To apply any settings you have altered on the page, please click the Save button, and then

you will be reminded to reboot the device.

2. For meeting US regulation on frequency band, Region is set as United States by default and

can’t be changed. Channel 12 and 13 are not available under this setting.

2) Multi-SSID: This mode allows the device to support up to 4 SSIDs.

Figure 4-9 Wireless Settings in Multi-SSID mode

¾ Enable VLAN - Check this box and then you can change the VLANID of each SSID. If you

want to configure the Guest and Internal networks on VLAN, the switch you are using must

support VLAN. As a prerequisite step, configure a port on the switch for handling VLAN

tagged packets as described in the IEEE802.1Q standard, and enable this field.

¾ SSID (1-4) - Up to 4 SSIDs for each BSS can be entered in the filed SSID1 ~ SSID4. The

name can be up to 32 characters. The same name (SSID) must be assigned to all wireless

devices in your network. If Enable VLAN is checked, the wireless stations connecting to

SSID of different VLANID can not communicate with each other.