User's Manual

PW-DN4210D

Wireless High Gain USB Adapter

Chapter 4. WPS configuration

WPS (Wi-Fi Protected Setup) function allows you to add a new wireless device to an existing

network quickly.

If the wireless card supports Wi-Fi Protected Setup (WPS), you can establish a wireless

connection between wireless card and router using either Push Button Configuration (PBC)

method or PIN method.

First, the WPS software should be installed. Insert the Resource CD into your CD-ROM drive.

To continue, double-click My Computer, and then double-click the CD/DVD drive where the

installation CD was placed. Open PW-DN4210D folder, and double-click wps.exe. Then you

will see Figure 4-1.

Figure 4-1

Then, please follow the step-by-step instruction to complete the WPS installation. After that,

WPS function can be enabled. Here we will introduce two ways to configure the WPS.

4.1 PBC (Push Button Configuration) method

1. Firstly, press the WPS button of the router. There are two ways:

1) Press the WPS button directly on the front panel of the Router shown in X Figure 4-2.