User's Guide

Wireless Lite-N USB Adapter User GuidePW-DN427
- 28 -
Step 5. Right-click “My Computer” and select Management. In the prompt page, click Device
Manager, then right-click “150M Wireless Lite-N Client Adapter “and select Properties.
Then set the value of “PSP Xlink Mode” as Enable following the red marked instruction
in the figure.
Figure 5-2
Step 6. Click Start > Control Panel > Network.
Figure 5-3
Step 7. Right-click Wireless Network Connection icon , and select Properties. In the
following prompt page, highlight Internet Protocol(TCP/IP) and click Properties.