User's Manual

PW-DN427 Wireless N USB Adapter User Guide
- 21 -
2) Enter a PIN from my Access Point
Step 1 Click the Add WPS Profile icon
on the screen as Figure 3-14.
Step 2 Tick PIN/numeric code and then select the desired SSID from the WPS AP List
(take Network for example) on the screen below.
Figure 3-23
Step 3 Choose the Config Mode as Registrar and enter the PIN of AP (here takes
97056270 for example) into the field beside the Pin Code as Figure 3-24 shows.
For the detailed instructions of the AP configuration, please refer to the User Guide
of the AP. And then click Next icon
to continue.
Figure 3-24 Registrar Mode
Step 4 Click Start PIN on the following screen.
Figure 3-25 Start PIN