User's Manual

PW-DN427 Wireless N USB Adapter User Guide
- 28 -
Chapter 4 AP Mode
Right click the icon to switch to AP Mode. In this mode you can use the PW-DN427 as a soft
AP.
Figure 4-1

Note:
At this time, if your PC has Installed other network card (wireless or wired), you will be prompted
“ICS Select WAN Adapter” to select one of them to be “WAN”. With this function PW-DN427 can
serve as wireless router based on the selected card connecting to the Internet, which will make
the APs of the LAN share the Internet.
Figure 4-2
The configuration utility screen will then appear as shown in the figure below. By clicking the
corresponding icon, you can configure the AP, make some advanced settings and view the AP’s
status. The tools section shown in the following figure respectively stands for Config AP
,
Advanced
, Access Control List , Associate List and About from the left to the
right .
Figure 4-3