User Guide

PW-DN523 300M Mini Wireless N USB Adapter
18
Figure 3-4
Step 1: Select the “Open System” as the Network Authentication.
Step 2: Select the “WEP” as Data encryption.
Step 3: Select the type for the password and you can select the ASCII or Network Key. For
ASCII, you can enter any characters in the keyboard; For Network Key, you can enter
the characters from 0 to 9.
Step 4: Select the Key index “1”.
Step 5: Enter “0123456789” as the Network key.
Step 6: Enter it again to confirm the Network Key and click the OK to save the configuration.
2. Shared Key authentication
When you select the Shared Key as the authentication, the only available data encryption is
WEP.
)
Note:
The configuration for Shared Key authentication and Open System are similar, you can refer to
the Open System authentication to configure it.
3. WPA-PSK authentication
When you select the WPA-PSK as the authentication, the available data encryptions are TKIP
and AES. Please select the one according your need.
For example: If the wireless network takes WPA-PSK authentication, TKIP data encryption, the
network key is 0123456789. You can configure it for adapter as follows.