User's Guide

PW-MN427_34I 150Mbps Wireless N USB Module User Guide
- 11 -
Figure 3-4
Step 8. In the prompt page shown below, select Use the Following IP Address, and set the IP
and Subnet mask. After completing setting, click OK.

Note:
Figure 3-5
Please set the IP address in different network segment with the other network card to avoid
conflict.
Step 9. Launch RL52 Wireless N Client Utility, then highlight the Network Name (SSID)
beginning with “PSP” in the “Network” page, and click Connect.
Step 10. Check whether your PSP device is detected in the Diagnostics mode of Kai as Figure
5-6 shown: Click the icon first and then click the folder .