User's Guide
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuration for AP Mode
- Chapter 5. Configuration for Router Mode
- Chapter 6. Configuration for Repeater Mode
- Chapter 7. Configuration for Bridge Mode
- Chapter 8. Configuration for Client Mode
- Appendix A: FAQ
- Appendix B: Configuring the PC
- Appendix C: Specifications
- Appendix D: Glossary
PW-RN401M
150Mbps Wireless N Nano Router
- 137 -
7.8.6 Password
Choose menu “System Tools
→
Password”, and then you can change the factory default user
name and password of the Router in the next screen as shown in
Figure 7-22.
Figure 7-22 Password
It is strongly recommended that you should change the factory default user name and password
of the Router, because all users who try to access the Router's Web-based utility or Quick Setup
will be prompted for the Router's default user name and password.
Note:
The new user name and password must not exceed 14 characters in length and not include any
spaces. Enter the new Password twice to confirm.
Click the Save button when finished.
Click the Clear All button to clear all.
7.8.7 System Log
Choose menu “System Tools
→
System Log”, and then you can view the logs of the Router.
Figure 7-23 System Log
Refresh - Refresh the page to show the latest log list.
Clear All - All the logs will be deleted from the Router permanently, not just from the page.