User's Guide

PW-RN401M
150Mbps Wireless N Nano Router
- 59 -
• Dynamic IP - You can check this radio button to use Dynamic IP as the secondary
connection to connect to the local area network provided by ISP.
• Static IP - You can check this radio button to use Static IP as the secondary
connection to connect to the local area network provided by ISP.
 Connect on Demand - In this mode, the Internet connection can be terminated
automatically after a specified inactivity period (Max Idle Time) and be re-established
when you attempt to access the Internet again. If you want your Internet connection
keeps active all the time, please enter “0” in the Max Idle Time field.
Otherwise, enter
the number of minutes you want to have elapsed before your Internet access
disconnects.
 Connect Automatically - The connection can be re-established automatically when it
was down.
 Time-based Connecting - The connection will only be established in the period from the
start time to the end time (both are in HH:MM format).

Note:
Only when you have configured the system time on “System Tools → Time” page, will the
Time-based Connecting function can take effect.
 Connect Manually - You can click the Connect/Disconnect button to
connect/disconnect immediately. This mode also supports the Max Idle Time function as
Connect on Demand mode. The Internet connection can be disconnected automatically
after a specified inactivity period and re-established when you attempt to access the
Internet again.
Click the Connect button to connect immediately. Click the Disconnect button to disconnect
immediately.
Caution: Sometimes the connection cannot be terminated although you specify a time to Max Idle
Time because some applications are visiting the Internet continually in the background.
If you want to do some advanced configurations, please click the Advanced button, and the page
shown in Figure 5-9 will then appear: