User's Manual

PW-RN401/PW-RN401D
150M Wireless N Router
- 12 -
2) If the connection type is Dynamic IP, the next screen will appear as shown in Figure 3-9.
Then you can go on with the wireless configuration.
3) If the connection type is Static IP, the next screen will appear as shown in Figure 3-8.
Figure 3-8 Quick Setup - Static IP
 IP Address - This is the WAN IP address as seen by external users on the Internet
(including your ISP). Enter the IP address into the field.
 Subnet Mask - The Subnet Mask is used for the WAN IP address, it is usually
255.255.255.0.
 Default Gateway - Enter the gateway IP address into the box if required.
 Primary DNS - Enter the DNS Server IP address into the box if required.
 Secondary DNS - If your ISP provides another DNS server, enter it into this field.
5. Click Next to continue, the Wireless settings page will appear as shown in Figure 3-9.
Figure 3-9 Quick Setup – Wireless