User's Manual

PW-RN401/PW-RN401D
150M Wireless N Router
- 35 -
 WPA-PSK/WPA2-PSK - It’s the WPA/WPA2 authentication type based on pre-shared
passphrase. If you check this radio button, the page will appear as shown in Figure 4-18
Figure 4-18
 Version - you can choose the version of the WPA-PSK security on the drop-down list. The
default setting is Automatic, which can select WPA-PSK (Pre-shared key of WPA) or
WPA2-PSK (Pre-shared key of WPA) automatically based on the wireless station's
capability and request.
 Encryption - When WPA-PSK or WPA is set as the Authentication Type, you can select
either Automatic, or TKIP or AES as Encryption.
 PSK Passphrase - You can enter a Passphrase between 8 and 63 characters.
 Group Key Update Period - Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
Be sure to click the Save button to save your settings on this page.
4.6.3 Wireless MAC Filtering
Choose menu “Wireless → MAC Filtering”, you can control the wireless access by configuring
the Wireless MAC Filtering function, shown in Figure 4-19.
Figure 4-19 Wireless MAC Filtering
To filter wireless users by MAC Address, click Enable. The default setting is Disable.
 MAC Address - The wireless station's MAC address that you want to filter.