User's Manual

PW-RN401/PW-RN401D
150M Wireless N Router
- 41 -
 Primary DNS - (Optional.) Input the DNS IP address provided by your ISP or consult your
ISP.
 Secondary DNS - (Optional.) Input the IP address of another DNS server if your ISP
provides two DNS servers.

Note:
To use the DHCP server function of the Router, you must configure all computers on the LAN as
"Obtain an IP Address automatically".
4.7.2 DHCP Clients List
Choose menu “DHCP → DHCP Clients List”, you can view the information about the clients
attached to the Router in the screen as shown in Figure 4-25.
Figure 4-25 DHCP Clients List
 Client Name - The name of the DHCP client
 MAC Address - The MAC address of the DHCP client.
 Assigned IP - The IP address that the Router has allocated to the DHCP client.
 Lease Time - The time of the DHCP client leased. After the dynamic IP address has expired,
a new dynamic IP address will be automatically assigned to the user.
You cannot change any of the values on this page. To update this page and to show the current
attached devices, click the Refresh button.
4.7.3 Address Reservation
Choose menu “DHCP → Address Reservation”, you can view and add a reserved address for
clients via the next screen (shown in Figure 4-26).When you specify a reserved IP address for a
PC on the LAN, that PC will always receive the same IP address each time when it accesses the
DHCP server. Reserved IP addresses should be assigned to the servers that require permanent IP
settings.