User's Manual

PW-RN401/PW-RN401D
150M Wireless N Router
- 48 -
 Current UPnP Settings List - This table displays the current UPnP information.
 App Description - The description provided by the application in the UPnP request.
 External Port - The external port the Router opens for the application.
 Protocol - The type of protocol the Router opens for the application.
 Internal Port - The Internal port the Router opens for local host.
 IP Address - The IP address of the UPnP device that is currently accessing the Router.
 Status - The status of the port is displayed here. “Enabled” means that the port is still
active. Otherwise, the port is inactive.
Click Refresh to update the Current UPnP Settings List.
4.9 Security
Figure 4-35 The Security menu
There are six submenus under the Security menu: Firewall, IP Filtering, Domain Filtering, MAC
Filtering, Remote Management and Advanced Security. Click any of them, and you will be able
to configure the corresponding function. The detailed explanations for each submenu are provided
below.
4.9.1 Firewall
Using the Firewall page, you can turn the general firewall switch on or off. The default setting for
the switch is off. If the general firewall switch is off, even if IP Address Filtering, DNS Filtering and
MAC Filtering are enabled, their settings are ineffective. You can configure the basic security in the
screen as shown in Figure 4-36.