User's Guide
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuring the Router
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
MR5-WR542G 54Mbps Wireless Router User Guide
14
4.2 Status
The Status page displays the router's current status and configuration. All information is read-only.
1. LAN
This field displays the current settings or information for the LAN, including the MAC address, IP
address and Subnet Mask.
2. Wireless
This field displays basic information or status for wireless function, including Wireless Radio, SSID,
Channel, Mode, Wireless MAC address, and IP address.
3. WAN
These parameters apply to the WAN port of the router, including MAC address, IP address,
Subnet Mask, Default Gateway, DNS server and WAN connection type. If PPPoE is chosen as
the WAN connection type, the Disconnect button will be shown here while you are accessing the
Internet. You can also cut the connection by clicking the button. If you have not connected to the
Internet, just click Connect to establish the connection.
Traffic Statistics
This field displays the router's traffic statistics.
4. System Up Time
Here displayed the total up time of the router from when it was switched on or reset.
Required field