User's Guide

MR5-WR542G 54Mbps Wireless Router User Guide
23
Figure 4-10 Big Pond Settings
¾ User Name/Password - Enter the User Name and Password provided by your ISP. These fields are
case-sensitive.
¾ Auth Server - Enter the authenticating server IP address or host name.
¾ Auth Domain - Type in the domain suffix server name based on your location. Eg,
NSW / ACT - nsw.bigpond.net.au
VIC / TAS / WA / SA / NT - vic.bigpond.net.au
QLD - qld.bigpond.net.au
¾ Connect on Demand - You can configure the router to disconnect from your Internet connection
after a specified period of inactivity (Max Idle Time). If your Internet connection has been
terminated due to inactivity, Connect on Demand enables the router to automatically re-establish
your connection as soon as you attempt to access the Internet again. If you wish to activate
Connect on Demand, click the radio button. If you want your Internet connection to remain active at
all times, enter 0 in the Max Idle Time field. Otherwise, enter the number of minutes you want to
have elapsed before your Internet connection terminates.
Caution: Sometimes the connection cannot be disconnected although you specify a time to Max
Idle Time, since some applications are visiting the Internet continually in the background.
¾ Connect Automatically - Connect automatically after the router is disconnected. To use this option,
click the radio button.