User's Guide
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuring the Router
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
MR5-WR542G 54Mbps Wireless Router User Guide
46
Figure 4-35 IP address Filtering
To disable the IP Address Filtering feature, keep the default setting, Disabled. To set up an IP Address
Filtering entry, click Enable Firewall and Enable IP Address Filtering on the Firewall page, and click the
Add New… button. The page "Add or Modify an IP Address Filtering entry" will appear shown in
Figure 4-36:
Figure 4-36 Add or Modify an IP Address Filtering Entry
To create or modify an IP Address Filtering entry, please follow these instructions:
1. Effective Time - Enter a range of time in HHMM format, which point to the range time for the entry
to take effect. For example, 0803 - 1705, the entry will take effect from 08:03 to 17:05.
2. LAN IP Address - Enter a LAN IP Address or a range of LAN IP addresses in the field, in
dotted-decimal notation format. For example, 192.168.1.20 - 192.168.1.30. Keep the field open,
which means all LAN IP Addresses have been put into the field.
3. LAN Port - Enter a LAN Port or a range of LAN ports in the field. For example, 1030 - 2000. Keep
the field open, which means all LAN ports have been put into the field.