User's Guide

MR5-WR542G 54Mbps Wireless Router User Guide
52
Figure 4-42 Advanced Security settings
¾ Packets Statistic interval (5 ~ 60) - The default value is 10. Select a value between 5 and 60
seconds in the pull-down list. The Packets Statistic interval value indicates the time section of the
packets statistic. The result of the statistic used for analysis by SYN Flood, UDP Flood and
ICMP-Flood.
¾ DoS protection - Enable or Disable the DoS protection function. Only when it is enabled, will the
flood filters be effective.
¾ Enable ICMP-FLOOD Attack Filtering - Enable or Disable the ICMP-FLOOD Attack Filtering.
¾ ICMP-FLOOD Packets threshold: (5 ~ 3600) - The default value is 50. Enter a value between 5 ~
3600 packets. When the current ICMP-FLOOD Packets number sis beyond the set value, the
router will start up the blocking function immediately.
¾ Enable UDP-FLOOD Filtering - Enable or Disable the UDP-FLOOD Filtering.
¾ UDP-FLOOD Packets threshold: (5 ~ 3600) - The default value is 50. Enter a value between 5 ~
3600 packets. When the current UPD-FLOOD Packets numbers is beyond the set value, the router
will start up the blocking function immediately.
¾ Enable TCP-SYN-FLOOD Attack Filtering - Enable or Disable the TCP-SYN- FLOOD Attack
Filtering.
¾ TCP-SYN-FLOOD Packets threshold: (5 ~ 3600) - The default value is 50. Enter a value between
5 ~ 3600 packets. When the current TCP-SYN-FLOOD Packets numbers is beyond the set value,
the router will start up the blocking function immediately.
¾ Ignore Ping Packet from WAN Port - Enable or Disable ignore ping packet from WAN port. The