User's Guide

Bluetooth Play Mode
If you are using a Bluetooth audio device, make sure the working distance
is within 20 - 30 ft, different environment may have effect on the working
distance.
1. Press and hold button to turn ON the unit, The unit will give a beeping
sound to indicate it is in Bluetooth mode, blue LED will flash quickly.
2. Turn on the Bluetooth on your audio device
3. Searching Devices Choose " M7 ". No
password is required.If your device does require a password,type”0000”
4. Adjust the volume on your audio device to the desired level.
5. Press the or Button on the unit to adjust the system volume.
6. Hold the or Button on the unit to adjust the Previous/Next song.
7. Press Button at the same time to pause/play music.
NOTE : The speaker will power off automatically after 30mins if you don't
operat it or play music.
Package Contents
- Rechargeable Speaker
- Micro USB Charging cable
- User guide
USER MANUAL
Please read the manual carefully before use
and keep it well for further use
i
Product Description
PC
Charging in
1. Use the included USB Charging cable, Plug one end into the DC 5V jack
located at the side of the unit , Plug the other end into a USB powered
port or any other USB AC adapter (not included).
2. The battery is fully charged in 3.5 hours .(Charging time will be longer if
play music while charging .)
3. The red LED light indicates that the unit is charging , The red LED turns
off when the battery is fully charged , You can disconnect the charging
cable when charging is complete.
Charging The Battery
AUX Play Mode
1.
Hold the button to turn on the unit
2. Plug one end of 3.5mm audio cable into the headphone or line-out jack of
your audio device.Plug the other end of the cable into the AUX jack located
on the Side of the unit，Unit will go to Aux in mode automatically ,white
LED will stay one .
3. Adjust the volume of your audio device to the desired level.
4. Press the or Button on the unit to adjust the system volume.
5. Press button button at the same time to MUTE the system volume.
Making Calls with a Bluetooth Mobile Phone
Before you make a call with the unit, you need to pair and link your
Bluetooth-enabled phone with the unit. Please refer to Pairing procedure
1. To answer a call, press the Button. Now you can use the unit as a
speaker phone.
3. To end the call, press the Button.
NOTE : The microphone is located on the upside of the play/pause button.
TWS Function
1. Hold the button to turn on the two unit
2. Press button twice to enter TWS pair mode ,White LED light will
flash quickly
3. Two unit paired ,Main unit White LED light is stay on , another unit white
LED light is flash status
4. Turn on bluetooth of audio device and pair with main unit .
5. Play the music from audio device ,two unit will be work as stereo sound ,
one is left channel ,another is right channel
Micro SD Play Mode
1.
1, Hold the button to turn on the unit
2. Plug your Micro SD card to the SD card port on the side of the unit . The unit
will entry the SD card play mode automatically .
3.Press the or Button on the unit to adjust the system volume.
5. Hold the or Button on the unit to adjust the Previous/Next song.
4.Press the Button to pause/play music.
TROUBLESHOOTING
No sound
• Make sure the volume of your speaker is not at
the minimumsetting.
• Make sure the connected audio device is playing
audio.
Sound is
distorted.
Turn down the volume of the speaker or the
connected device.
Cannot pair
the speaker
with my
Bluetooth
device
• Make sure the Bluetooth mode of your device is
turned on.
• Your Bluetooth device may be out of range. Try
moving it closer to the speaker.
• Move your Bluetooth device and/or the speaker
away from other devices that generate
electromagnetic interference, such as phones,
microwave oven, wireless network routers, or other
Bluetooth devices.
Problem What to do
No power
Make sure your speaker is turned on. Makes sure
your speaker is completely charged.
To prevent the possibility of the battery from leaking,
heating, fire .please observe the following precautions:
Warnings
1: Please use attached USB charging cable in the package to charge unit
2: Please disconnect charge cable after full charged the unit, Do not charge
the unit for long time after unit full charged
3: Do not immerse the product in water and seawater
4: Do not use and leave the product near a heat source as fire or heater
5: Do not place it into water , any other liquid ,Fire or any heater machine
6: Do not strike or throw the product.
Cautions
1: Do not use or leave the product at very high temperature (for example,
at strong direct sunlight or a vehicle in extremely hot conditions).Otherwise,
it can overheat or fire or its performance will be degenerate and its service
life will be decreased.
2: Do not use it in a location where static electricity is great, otherwise, the
safety devices may be damaged, which will cause hidden trouble of
safety.
3: The batteries should be stored at room temperature, charged to about
30% to 50% of capacity. In case of over-discharge, batteries should be
charged for one time every.
4: months while storing and batteries should be discharge and charge after
being stored more than a year in order to activate it and restore energy.
5: Please following Waste battery recycling method to dispose the unit .
This product bears the selective sorting symbol for waste
electrical and electronic equipment (WEEE).
This means that this product must be handled pursuant
to European Directive 2002/96/EC in order to be recycled or
dismantled to minimize its impact on the environment.
For further information, please contact your local or regional
authorities.
DC 5V IN
2
1
4
3
1. Power on/off audio mode and
TWS pair. (hold the button for
power on/off, press the button
for mode select, Press Twice
quickly for TWS pair mode
2. LED function indicator.
Bluetooth mode :
Search Status :White LED quick
flash Successful pairing: White lights
flash slowly
Line in mode :
White LED light stay on
SD play mode
White LED light flashes quickly twice
and stops once
Mute :
White light is breathing slowly flash
3. Microphone
4.
Press for Play/Pause /Handfree,
Hold on for disconnect
Bluetooth
.
5. Press Button for volume down,
hold on for previous song.
1. Press Button for volume up,
hold on for next song.
If at any time in the future you should need to dispose of this product please
note that Waste electrical products should not be disposed of with household
waste.Please recycle where facilities exist.Check with your Local Authority
or retailer for recyclingadvice. (Waste Electrical and Electronic Equipment
Directive)
When electrostatic discharge occur, this product may malfunction, and
need to restart or reset it for recover
RF Operating frequency range : 2402-2480MHz
Note: If the products use in outdoor or splash status ,Do please close the
silicon cover for USB charge ,SD card,Aux in which locate in the side of
product ,in case of products not damage
1 32 4 65
1: Micro SD Jack
2. Line in input
3. Charge LED indicator
(Red LED indicates the
unit is charging and not
full.
Red LED will turn off
when fully charged.
4. DC 5V charge in
(5V/1000mA)
Waterproof Bluetooth Speaker
Model No.: ProMini M7
FCC Statement
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions (1)this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.