Product Specs

Shenzhen KTC Commercial Display Technology CO.,LTD.

WIFI Module

Model Number: PW.2.12004.0002

Product Descrition：

The AMPAK Technology® AP6275P is a fully Wi-Fi and Bluetooth functionalities module

with seamless roaming capabilities and advance security, also it could interact with different

vendors’ 802.11a/b/g/n/ac/ax 2x2 Access Points with MIMO standard and can accomplish up

to speed of 1200Mbps with dual stream in 802.11ax to connect the wireless LAN.

Furthermore AP6275P included PCIe interface for Wi-Fi, UART/ PCM interface for Bluetooth.

In addition, this compact module is a total solution for a combination of Wi-Fi + BT

technologies. The module is specifically developed for tablet, OTT box and portable devices.

Product Specification

General Specification

2.4GHz RF Specification

PAGE 1
Shenzhen KTC Commercial Display Technology CO.,LTD. WIFI Module Model Number: PW.2.12004.0002 Product Descrition： The AMPAK Technology® AP6275P is a fully Wi-Fi and Bluetooth functionalities module with seamless roaming capabilities and advance security, also it could interact with different vendors’ 802.11a/b/g/n/ac/ax 2x2 Access Points with MIMO standard and can accomplish up to speed of 1200Mbps with dual stream in 802.11ax to connect the wireless LAN.
PAGE 2
Shenzhen KTC Commercial Display Technology CO.,LTD.
PAGE 3
Shenzhen KTC Commercial Display Technology CO.,LTD. - Trace antenna designs Not applicable. - RF exposure considerations This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This modular must be installed and operated with a minimum distance of 20 cm between the radiator and user body. - Antennas Antenna Type: External Antenna Antenna Gain: 2.
PAGE 4
Shenzhen KTC Commercial Display Technology CO.,LTD. Any final host product with the modular transmitter installed should be under test according to guidance given in KDB 996369 D04. To enter test mode for module, RFTestTool.apk test software and adb command is necessary. When something wrong happens in configuring test modes for host product with module, host product manufacturer should coordinate with module manufacturer for technical support.