CUE 2.0 USER MANUAL VERSION 1.
Revision Control Version Release Date Description Author 1.0 1.1 18 JUN 2020 4 JUL 2020 S. Kadiwala (MPC) S. Kadiwala (MPC) 1.2 15 AUG 2020 Initial Release Update to Section 6.1 (eLabel) Update to IC notices, Section 5.0. Renumber and update section 6.1 to 7.0 and added notes on regulatory info access at any time. S.
TABLE OF CONTENTS 1.0 INTENDED USE ................................................................................................................................ 1 2.0 INSTALLATION & SETUP INSTRUCTIONS ............................................................................. 1 3.0 REGULATORY INFORMATION & NOTICE ............................................................................... 3 3.1 §15.19 Label Interference Note for FCC Part 15 ...........................................................
1.0 INTENDED USE This device is a Smart badge worn around the neck with an appropriate lanyard as provided, or recommended, by Proxfinity, Inc. The placement of the badge should be somewhere on the torso of the individual, though actual height may vary from person to person. For certain use-cases, the device can also be hand-held, to access physical keys located on the bottom surface of the badge.
For official provisioning and Event-related or Contract tracing usage details for a particular application, please contact your Proxfinity Sales representative, or fill out the contact form at https://www.proxfinity.com/ for more information or support.
3.0 REGULATORY INFORMATION & NOTICE 3.1 §15.19 Label Interference Note for FCC Part 15 This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSSs. Operation is subject to the following two conditions: a) this device may not cause harmful interference, and b) this device must accept any interference received, including interference that may cause undesired operation. 3.2 §15.21 Modifications Note Changes or modifications not expressly approved by Proxfinity, Inc.
4.0 RF EXPOSURE REQUIREMENTS RF Exposure requirements for this device are met during normal wear conditions, assuming the badge is residing on-body, hanging from a lanyard, near the torso. The applicable SAR limits have been tested against, directly and have been measured within compliance.
6.0 REGULATORY IDENTIFICATION INFORMATION MODEL: FCC ID: IC ID: CUE 2.0 2AFPT-CUE020 22224-CUE020 7.0 REGULATORY INFORMATION ACCESS The regulatory information provided in Section 6.0 is displayed by default at boot-up/power-up. It should remain on the screen for several seconds. A sample image showing the format and content that will be display, is below: The regulatory information can be accessed at any time by simply powering off the device and powering it back on.