Specification Sheet

ANT-122-S02
Low Profile MIMO 4G/LTE Omni Screw-Mount Antenna
- 1 of 7 -
Data Sheet: Rev C 08/14/20
© Proxicast, LLC. All rights reserved.
Disclaimer: Subject to change without notice
www.proxicast.com • 1-877-777-7694
• Kiosks
• Vending Machines
• Digital Signage
• Video Surveillance
• Point-of-Sale Terminals
• SCADA / Telemetry / PLCs
• 2 MIMO Elements in Single Radome
• Ultra Low Profile ~ 0.6 inches Tall
• Vandal Resistant & Weatherproof
• Compatible with all 3G & 4G/LTE Networks
• Compatible with most Cellular Modems/Routers
• 2.5 dBi Peak Gain
• Omni-Directional
• SMA Male Connectors on 6.5 ft Low-Loss Coax
Part No. Description
ANT-122-S02
Proxicast Ultra Low Profile
MIMO 4G / LTE Omni-
Directional Screw-Mount
Antenna
This extremely low profile (< 0.6 inches tall) fixed mount omni-directional antenna provides up to 2.5 dBi of gain
and works on all 3G & 4G cellular frequency bands worldwide (all CDMA, GSM, WCDMA/UMTS and LTE
carriers) including AT&T, Verizon, Sprint, T-Mobile, Bell, Rogers and Telus.
Permanently mounts via a 1/2 in. (12 mm) hole with locking internal nut. Resists vandalism with no exposed
coax cable. Includes 6.5 ft of low-loss coax fed through center mounting post.
Completely waterproof (IP67) when properly installed with post extending into a water-tight enclosure. .
Designed for M2M applications such as vending machines, meter housings, equipment sheds, or other locations
requiring an inconspicuous low-profile external antenna. Can also be vehicle mounted for buses, vans, trucks or
other mobile installations.
Dual integrated SMA male plug connectors mate with SMA female jacks on MIMO capable modems, routers,
etc.
For optimum performance this antenna should be mounted through a flat, horizontal metal surface at least 8
inches in diameter.
General Description
Ordering Information
Product Features
Applications