Specification Sheet

ANT-129-001
4G/LTE Cross-Polarized (MIMO) 7-10 dBi Panel Antenna
- 2 of 10 -
Data Sheet: Rev D 12/30/18
© Copyright Proxicast, LLC. All rights reserved.
Disclaimer: Subject to change without notice
www.proxicast.com • 1-877-777-7694
Parameter Rating
Frequency Range
(all major cellular bands)
698~960 MHz
1710~2030 MHz
2110~2200 MHz
2300~2390 MHz
2500~2690 MHz
Peak Gain
7 -10 dBi frequency dependent
Beam Width Horizontal
70° / 75°
Beam Width Vertical
75° / 60°
VSWR
≤1.8:1
Input Impedance
50 Ohm
Polarization
Vertical + Horizontal @ ±45° (90° relative)
Max Input Power
50 W
Ground Plane
Not Required
DC Grounded
No
Parameter Rating
Connector Type
2x N Female (jack)
Cable Length
12 in (300mm) RG58U low-loss coax
Mounting
Pole or Wall – Pole Mounting Bracket included
1.2 in min, 2.0 in max dia pole (30 – 50 mm)
Dimensions
11.8 x 7.2 X 2.75 in (300 x 183 x 70 mm)
Materials
Radome: UV stabilized ABS plastic
Connector: Brass
Mounting: Aluminum / Stainless
U-Bolts: Hot Dipped Galvanized Steel
Antenna Color
Ivory
Weight
1.4 lb (0.64 kg) excluding mounting hardware
Operating Temperature
-40°C to +60°C
Operation of this device outside the parameter ranges given above may cause permanent damage.
Mechanical Specifications
Electrical Specifications