User's Manual
Page 18 Copyright © 2006 Proxim Wireless
Step 7: Complete Installation
Tighten the sealing nut (Torque 3 N∙m/25 in-lbs) and lock nut (Torque
4 N∙m/35 in-lbs).
CAUTION!
Do not over-tighten! Over-tightening can cause the CAT5 cable to
become pinched and can subsequently damage the power injector
or the unit.
Tighten the RJ45 sealing cap.
CAUTION!
Be sure you have re-installed the waterproof caps on the serial and
Ethernet port connections. It is also good installation practice to
use Butyl weatherproong tape to seal the caps, as this adds an
extra layer of protection.
1.
2.