User's Manual

Enter a static IP Address for the AP in the eld provided. You must

assign the unit a unique address that is valid on your IP subnet.

Enter your network’s Subnet Mask.

Enter your network’s Gateway IP Address.

Enter the SNMP read/write password in the Read/Write Password

eld. For new units, the default password is public.

Click OK to save your changes. The Access Point will reboot

automatically and any changes you made will take effect.

When prompted, click OK a second time to return to the Scan List

screen.

Click Cancel to close the ScanTool.

Logging In

Once the AP has a valid IP Address and an Ethernet connection, you may use

your web browser to monitor and congure the AP. (To congure and monitor

using the command line interface, see the AP-4000MR-LR User Guide)

Open a Web browser on a network computer.

If necessary, disable the browser’s Internet proxy settings.

Enter the Access Point’s IP address in the browser’s Address eld and

press Enter or Go. This is either the dynamic IP address assigned by a

network DHCP server or the static IP address you manually congured. See

Using ScanTool for information on how to determine the unit’s IP address

and manually congure a new IP address, if necessary.

Note:

Mesh APs must be congured with static IP addresses.

The Enter Network Password screen appears.