User's Manual

conguration screen. Note that clicking a link in the navigation panel

will not submit any changes you made to the unit’s conguration on the

current page.

Exit: To exit from the Setup Wizard at any time, click Step 1:

Introduction on the navigation panel, and then click the Exit button.

CAUTION:

If you exit from the Setup Wizard, any changes you submitted (by

clicking the Save & Next button) up to that point will be saved to the

unit but will not take effect until it is rebooted.

Follow the prompts provided by the Setup Wizard to perform an initial

conguration of the AP. See the AP-4000MR-LR User Guide for more detailed

Setup Wizard instructions and for Advanced Conguration instructions.

Installing the Software

Proxim periodically releases updated software for the AP-4000MR-LR on its

support Web site, http://support.proxim.com. Proxim recommends that you

check the Web site for the latest updates after you have installed and initialized

the unit.

Download the Software

In your web browser, go to http://support.proxim.com.

If prompted, create an account to gain access.

Note:

The Knowledgebase is available to all Web site visitors. First-time users will

be asked to create an account to gain access.

Click Search Knowledgebase.

In the Search Knowledgebase eld, enter 2334.

From the Search By drop-down menu, select Answer ID.

Click Search.

Click on the appropriate link in the Summary column to download the

software.

Click on the appropriate link to download the software.

Install the Software

Enter the Access Point’s IP address in the browser’s Address eld and press

Enter or Go.

▪