User's Manual

Click Commands > Update AP > via HTTP. The Update AP via HTTP

screen will be displayed.

From the File Type drop-down menu, select Image.

Use the Browse button to locate or manually type in the name of the

le (including the le extension) you downloaded from the Proxim

Knowledgebase. If typing the le name, you must include the full path and

the le extension in the le name text box.

To initiate the HTTP Update operation, click the Update AP button.

A warning message advises you that a reboot of the device will be required

for changes to take effect.

Click OK to continue with the operation or Cancel to abort the operation.

If the operation is unsuccessful, you will receive an error message. See

the AP-4000MR-LR User Guide for more information. If the operation is

successful, you will receive a conrmation message.

Reboot the AP as follows:

Click Commands > Reboot.

Enter

0 in the Time to Reboot eld.

Click

OK.

Note:

For instructions on downloading the software via a TFTP Server or the CLI

Interface, see the AP-4000MR-LR User Guide.