User's Manual
Table Of Contents
- Monitoring
- Commands
- Procedures
- Troubleshooting
- Frequency Bands and Channels
- Technical Specifications
- Part Numbers
- Regulatory Approvals and Frequency Ranges
- Integrated Antenna Specifications
- RF Modulation and Over-the-Air Rates
- Wireless Protocol
- Device Interface
- Network Architecture Type
- Receive Sensitivity
- Maximum Throughput
- Latency
- Transmit Power Settings
- Range Information
- System Processor and Memory
- Software Specification
- Security
- Management
- Antenna
- Status LEDs
- Local Configuration Support
- Compliance and Standards
- Electrical
- Dimensions
- Subscriber Unit with Integrated 21-dBi Antenna Unpackaged: 12.60 in x 12.60 in x 3.50 in (320 mm x 320 mm x 18 mm) Weight
- Environmental
- Packaging Contents
- MTBF
- Warranty
- Lightning Protection
- Technical Services and Support
- Statement of Warranty
Technical Specifications MP.11 4954-R Installation and Management
Software Specification
163
Software Specification
Base Station and Subscriber Units
• Miscellaneous
– WORP protocol
– Dynamic Data Rate Selection
– Transmit Power Control
– Antenna Alignment
– Integrity Check for Software Upload
– 5, 10, and 20 MHz channels
• Satellite Density
– Dynamic Frequency Selection
• Redundancy
– Spanning Tree (802.1D)
• Bridging and Routing
– Bridge (802.1d)
– IP/ RIPv1 (RFC 1058)
– IP/ RIPv2 (RFC 1388)
– CIDR (RFC 1519)
– ICMP (RFC 792)
– IP (RFC 791)
– ARP (RFC 826)
• Filtering
– Ethernet protocol (Ethertype)
– Static MAC
– Storm threshold
– IP address
– Broadcast protocol
• Services
– DHCP Server (RFC 2131)
– DHCP Client (RFC 2131)
– Bi-Directional Bandwidth Control
•VLAN
–802.1Q
• Security Features
– MAC Authentication
– Radius MAC Access Control
– WEP/AES-OCB encryption
– RADIUS (RFC 2138)
• Mobility
– Subscriber Unit Roaming