User's Manual

Configuration MP.11 4954-R Installation and Management

Management Parameters

When you click the Management button, Passwords is displayed automatically. The other tab under Management is the

Services tab.

Configure Passwords

The Password tab lets you configure the SNMP, Telnet, and HTTP (Web Interface) passwords.

For all password fields, the passwords must be between 6 and 32 characters. Changes take effect immediately after you

click OK. The following passwords are configurable:

• SNMP Read Community Password: The password for read access using SNMP. Enter a password in both the

Password field and the Confirm field. The default password is public.

• SNMP Read/Write Community Password: The password for read and write access using SNMP. Enter a password

in both the Password field and the Confirm field. The default password is public.

• Telnet (CLI) Password: The password for the CLI interface. Enter a password in both the Password field and the

Confirm field. The default password is public.

• HTTP (Web) Password: The password for the Web browser HTTP interface. Enter a password in both the Password

field and the Confirm field. The default password is public.

Configure Service Parameters

The Services tab lets you configure the SNMP, Telnet, and HTTP (Web Interface) parameters. Changes to these

parameters require a reboot to take effect.