User's Manual

Configuration MP.11 4954-R Installation and Management
Security Parameters
85
Security Parameters
Configure MAC Authentication
Click Configure > Security > MAC Auth to build a list of authorized wireless stations that can register at the unit and
access the network.
MAC authentication is available only for BSUs.
This feature is supported on the wireless interface and only wireless MAC addresses should be entered in the list. For
example, build a list of wireless MAC addresses on the BSU for the authorized SUs.
To add table entries, click the Add Table Entries button; a window such as the following is displayed:
Enter the MAC address and any comment, then click Add. The maximum number of MAC addresses that can be entered
is 250.
To edit or delete table entries, click the Edit/Delete Table Entries button; make your corrections in the window displayed
and click OK.