User Manual

6. Choose the security setting that is required on the wireless network. Once the
appropriate security mode is chosen the button next to the selection will enable you
to include any additional information required by that security mode.
The advanced tab provide more complex wireless settings and these settings should
only be modified if there is a specific requirement on your wireless network.
z Power Save Mode - allows the user to minimize power utilized by the
802.11a/b/g Combo Card device. Note: Setting Power Save Mode to enabled
(Normal or Maximum) may cause the user to experience an extended
connection delay of up to one minute.
z Network Type - allows the user to configure the 802.11a/b/g Combo Card
device as either an Ad-hoc or Access Point type network
z 802.11b Preamble - allows setting the preamble support to match up with the
specified wireless network.
z Transmit Power Level - allows the user to modify the power output of the
radio. Note: Setting this to any other value except 100% will decrease range
of your 802.11a/b/g Combo Card device.
z Wireless Mode Setting - The wireless Mode settings allow the user to specify
which wireless frequency and data rate the wireless network is operating at. If
all selections are chosen, the 802.11a/b/g Combo Card device will
automatically search all frequencies and data rates for wireless networks that
match up to the profile settings.