User Manual

z Wireless Mode when starting Ad-Hoc setting - The "Wireless Mode when
starting ad-hoc setting" allows the user to determine the type of ad-hoc
network to be started. Note: This setting will only take effect if there are no
other ad-hoc networks with the same SSID currently operating within range.
If existing ad-hoc networks with the same SSID are currently operating, then
the 802.11a/b/g Combo Card device will connect using the frequency and data
rate provided by the exiting ad-hoc network.
4-4 Diagnostic Tab
The diagnostic TAB displays the current data statistics for both receive and transmit.
Additional statistics and driver information can be displayed using the appropriate labeled
buttons.