User Manual
Table Of Contents
- Monitoring
- Commands
- Troubleshooting
- Command Line Interface (CLI)
- General Notes
- Command Line Interface (CLI) Variations
- CLI Command Types
- Using Tables and Strings
- Configuring the AP using CLI commands
- Log into the AP using HyperTerminal
- Log into the AP using Telnet
- Set Basic Configuration Parameters using CLI Commands
- Set System Name, Location and Contact Information
- Set Static IP Address for the AP
- Change Passwords
- Set Network Names for the Wireless Interface
- Enable 802.11d Support and Set the Country Code
- Enable and Configure TX Power Control for the Wireless Interface(s)
- Configure SSIDs (Network Names), VLANs, and Profiles
- Download an AP Configuration File from your TFTP Server
- Backup your AP Configuration File
- Set up Auto Configuration
- Other Network Settings
- Configure the AP as a DHCP Server
- Configure the DNS Client
- Configure DHCP Relay
- Configure DHCP Relay Servers
- Maintain Client Connections using Link Integrity
- Change Wireless Interface Settings
- Set Ethernet Speed and Transmission Mode
- Set Interface Management Services
- Configure Syslog
- Configure Intra BSS
- Configure Wireless Distribution System
- Configure MAC Access Control
- Set RADIUS Parameters
- Set Rogue Scan Parameters
- Set Hardware Configuration Reset Parameters
- Set VLAN/SSID Parameters
- Set Security Profile Parameters
- CLI Monitoring Parameters
- Parameter Tables
- CLI Batch File
- ASCII Character Chart
- Specifications
- Technical Services and Support
- Statement of Warranty
Command Line Interface (CLI) AP-4000/4000M/4900M User Guide
Parameter Tables
232
RADIUS Parameters
General RADIUS Parameters
RADIUS Server Configuration Parameters
NOTE: Use a server name only if you have enabled the DNS Client functionality. See DNS Client for RADIUS Name
Resolution.
Name Type Value Access CLI Parameter
RADIUS Group N/A R radius
Client Invalid Server
Address
Counter32 N/A R radcliinvsvradd
Name Type Value Access CLI Parameter
RADIUS Authentication Table N/A R radiustbl
Table Index (Profile
Index)
Integer N/A R index
Primary/Secondary Index Integer Primary (1)
Secondary (2)
R subindex
Status Integer enable
disable
RW status
Server Address Format Integer Ipaddr
Name
RW seraddrfmt
Server IP Address or
Name
IpAddress
DisplayString
User defined (enter an IP
address if seraddrfmt is
ipaddr or a name if set to
name; up to 254
characters if using a
name)
RW ipaddr
Port (optional) Integer User Defined
1812 (default)
RW port
Shared Secret DisplayString User Defined
6 - 32 characters
W ssecret
Response Time (optional) Integer 1 - 10 seconds
3 (default)
RW responsetm
Maximum
Retransmissions
(optional)
Integer 0 - 4
3 (default)
RW maxretx
RADIUS MAC Address
Format
Integer dashdelimited
colondelimited
singledashdelimited
nodelimiter
RW radmacaddrformat
RADIUS Accounting
Inactivity Timer
Integer32 1 - 60 minutes RW radaccinactivetmr
Authorization Lifetime Integer32 900 - 43200 seconds W radauthlifetm
RADIUS Accounting
Update Interval
Integer32 10 - 3600 minutes RW radacctupdinterval
VLAN ID vlanID -1 (untagged)
1 - 4094
RW radvlanid