User Manual
Table Of Contents
- Monitoring
- Commands
- Troubleshooting
- Command Line Interface (CLI)
- General Notes
- Command Line Interface (CLI) Variations
- CLI Command Types
- Using Tables and Strings
- Configuring the AP using CLI commands
- Log into the AP using HyperTerminal
- Log into the AP using Telnet
- Set Basic Configuration Parameters using CLI Commands
- Set System Name, Location and Contact Information
- Set Static IP Address for the AP
- Change Passwords
- Set Network Names for the Wireless Interface
- Enable 802.11d Support and Set the Country Code
- Enable and Configure TX Power Control for the Wireless Interface(s)
- Configure SSIDs (Network Names), VLANs, and Profiles
- Download an AP Configuration File from your TFTP Server
- Backup your AP Configuration File
- Set up Auto Configuration
- Other Network Settings
- Configure the AP as a DHCP Server
- Configure the DNS Client
- Configure DHCP Relay
- Configure DHCP Relay Servers
- Maintain Client Connections using Link Integrity
- Change Wireless Interface Settings
- Set Ethernet Speed and Transmission Mode
- Set Interface Management Services
- Configure Syslog
- Configure Intra BSS
- Configure Wireless Distribution System
- Configure MAC Access Control
- Set RADIUS Parameters
- Set Rogue Scan Parameters
- Set Hardware Configuration Reset Parameters
- Set VLAN/SSID Parameters
- Set Security Profile Parameters
- CLI Monitoring Parameters
- Parameter Tables
- CLI Batch File
- ASCII Character Chart
- Specifications
- Technical Services and Support
- Statement of Warranty
Commands AP-4000/4000M/4900M User Guide
Update AP
154
– SSH Private Key: the private key in SSH communications. See Secure Shell (SSH) Settings for more information.
– CLI Batch File: a CLI Batch file that contains CLI commands to configure the AP. This file will be executed by the
AP immediately after being uploaded. See CLI Batch File for more information.
– License File
• File Operation: Select either Update AP or Update AP & Reboot. You should reboot the AP after downloading files.
Update AP via HTTP
Use the Update AP via HTTP tab to download Configuration, AP Image, Bootloader files, and Certificate and Private Key
files to the AP.
Once on the Update AP screen, click on the via HTTP tab.
Figure 6-3 Update AP via HTTP Command Screen
The Update AP via HTTP tab shows version information and allows you to enter HTTP information as described below.
1. Select the File Type that needs to be updated from the drop-down box. Choices include:
– Image for the AP Image (executable program).
– Config for configuration information, such as System Name, Contact Name, and so on.
NOTE: The AP will reboot automatically when downloading a Config file.
– SSL Certificate: the digital certificate for authentication in SSL communications.
– SSL Private Key: the private key for encryption in SSL communications.
– Upgrade BSPBL: the Bootloader software.
– CLI Batch File: a CLI Batch file that contains CLI commands to configure the AP. This file will be executed by the
AP immediately after being uploaded. See CLI Batch File for more information.
– SSH Public Key: the public key in SSH communications. See Secure Shell (SSH) Settings for more information.
– SSH Private Key: the private key in SSH communications. See Secure Shell (SSH) Settings for more information.
– License File
2. Use the Browse button or manually type in the name of the file to be downloaded (including the file extension) in the
File Name field. If typing the file name, you must include the full path and the file extension in the file name text box.
3. To initiate the HTTP Update operation, click the Update AP button.