User Manual
Table Of Contents
- Monitoring
- Commands
- Troubleshooting
- Command Line Interface (CLI)
- General Notes
- Command Line Interface (CLI) Variations
- CLI Command Types
- Using Tables and Strings
- Configuring the AP using CLI commands
- Log into the AP using HyperTerminal
- Log into the AP using Telnet
- Set Basic Configuration Parameters using CLI Commands
- Set System Name, Location and Contact Information
- Set Static IP Address for the AP
- Change Passwords
- Set Network Names for the Wireless Interface
- Enable 802.11d Support and Set the Country Code
- Enable and Configure TX Power Control for the Wireless Interface(s)
- Configure SSIDs (Network Names), VLANs, and Profiles
- Download an AP Configuration File from your TFTP Server
- Backup your AP Configuration File
- Set up Auto Configuration
- Other Network Settings
- Configure the AP as a DHCP Server
- Configure the DNS Client
- Configure DHCP Relay
- Configure DHCP Relay Servers
- Maintain Client Connections using Link Integrity
- Change Wireless Interface Settings
- Set Ethernet Speed and Transmission Mode
- Set Interface Management Services
- Configure Syslog
- Configure Intra BSS
- Configure Wireless Distribution System
- Configure MAC Access Control
- Set RADIUS Parameters
- Set Rogue Scan Parameters
- Set Hardware Configuration Reset Parameters
- Set VLAN/SSID Parameters
- Set Security Profile Parameters
- CLI Monitoring Parameters
- Parameter Tables
- CLI Batch File
- ASCII Character Chart
- Specifications
- Technical Services and Support
- Statement of Warranty
Command Line Interface (CLI) AP-4000/4000M/4900M User Guide
Parameter Tables
219
Wireless Distribution System (WDS) Parameters
Wireless Distribution System (WDS) Security Table Parameters
The WDS Security Table manages WDS related security objects.
Wireless Interface SSID/VLAN/Profile Parameters
The Wireless Interface SSID table manages the SSIDs, VLANs, Security Profiles, and RADIUS Profiles associated to
each SSID.
For configuration examples, see Configure SSIDs (Network Names), VLANs, and Profiles.
Name Type Value Access CLI Parameter
WDS Table Table N/A R wdstbl
Port Index Integer 3.1 - 3.6 (Wireless) R portindex
Status Integer enable, disable RW status
Partner MAC Address PhysAddress User Defined RW partnermacaddr
Name Type Value Access CLI Parameter
WDS Security Table Table N/A R wdssectbl
Table Index Integer Primary wireless
interface = 3
Secondary wireless
interface = 4
R index
Security Mode Integer 1 or none
2 or wep
3 or aes
RW secmode
Shared Secret DisplayString 6–32 characters W sharedsecret
Encryption Key 0 WEPKeyType N/A W encryptkey0
Name Type Value Access CLI Parameter
Wireless Interface SSID
Table
Table N/A R wifssidtbl
Table Index Integer Primary wireless
interface = 3
Secondary wireless
interface = 4
R index
SSID Table Index Integer32 1 - 16 (SSID index) R ssidindex
SSID DisplayString 2 - 32 characters RW ssid
Broadcast Unique
Beacon
Integer enable
disable
RW bcastbeacon
Closed System Integer enable,
disable
RW denybcastprobereq
VLAN ID VlanId -1 - 4094 or untagged RW vlanid
Rekeying Interval Integer32 0 (disabled)
300 - 65535
Default = 900
RW reykeyint
Table Row Status RowStatus enable
disable
delete
RW status
SSID Authorization
Status per VLAN
Integer enable
disable
RW ssidauth