User Manual

Advanced Configuration AP-4000/4000M/4900M User Guide

Alarms

All these alarm groups correspond to System Alarms that are displayed in the System Status Screen, including the traps

that are sent by the AP to the SNMP managers specified in the Alarm Host Table.

Alarm Host Table

To add an entry and enable the AP to send SNMP trap messages to a Trap Host, click Add, and then specify the IP

Address and Password for the Trap Host.

NOTE: Up to 10 entries are possible in the Alarm Host table.

• IP Address: Enter the Trap Host IP Address.

• Password: Enter the password in the Password field and the Confirm field.

• Comment: Enter an optional comment, such as the alarm (trap) host station name.

To edit or delete an entry, click Edit. Edit the information, or select Enable, Disable, or Delete from the Status

drop-down menu.

topologyChange Trap is not sent if a newRoot trap is sent for the

same transition

Informational

Trap Name Description Severity Level