User Manual

INSTALLATION AND MAINTENANCE MANUAL
LYNX.sc E1 FAMILY
SPREAD SPECTRUM RADIOS
OCTOBER 1998
SECTION 2: PRODUCT DESCRIPTION PAGE 2-17
2.4.1 RF Connection
The RF port of the LYNX.sc radio is an N-type female connector that is an integral part of the filter
assembly. The filter assembly occupies nearly the entire top half of the rear panel. The N-Type
connector is used to connect the antenna, typically using coaxial transmission line. In some
cases, waveguide may be used as the primary transmission line, in which case a waveguide-to-N
adapter is required.
For the LYNX.sc, 1/2" or 5/8” coaxial cable (LDF4-50 or
LDF4.5-50) is recommended. Coaxial cable that is 7/8” or
larger can exhibit moding at 5.8 GHz and is not recommended
for 5.8 GHz radios. For waveguide transmission line at 5.8
GHz, EW-52 waveguide is recommended. EW-63 will also
work, but may exhibit more loss.