Software Guide

Advanced Configuration
Tsunami
®
800 & 8000 Series - Software Management Guide 104
After configuring the required parameters, click OK and then COMMIT.
Reboot the device, if you have changed any of the Wireless Interface parameters with an asterisk (*) symbol.
5.4.3.0.2 MIMO
The MIMO Properties tab allows you to configure the Multiple-Input-Multiple-Output (MIMO) parameters that enable to
achieve high throughput and longer range.
Under MIMO screen, you can configure and view the following parameters.
Legacy Mode By default, Legacy Mode is disabled. When enabled, the MP 800 & 8000 BSU and SU
devices can interoperate with the legacy products of the Tsunami
®
MP.11 family.
The MP 800 & 8000 devices that provide legacy support are,
·
MP-8100-BSU
·
MP-8100-SUA
·
MP-8150-SUR
·
MP-8150-CPE
·
MP-8150-SUR-100
·
MP-8200-BSU
·
MP-8250-BS9
·
MP-8250-BS1
·
MP-8200-SUA
·
MP-8250-SUR
·
MP-825-CPE-50
·
MP-825-SUR-50
+
·
MP-820-BSU-100
·
MP-820-SUA-50
+
: MP 800/8000 BSU device in legacy mode can connect to a MP 800/8000 SU
device only when configured in legacy mode.
Parameter Descriptions