Software Guide

Advanced Configuration
Tsunami
®
800 & 8000 Series - Software Management Guide 147
In this example, all bits in the IP Mask are enabled, so incoming traffic’s multicast IP address should exactly match with
specified configured multicast IP Address (i.e, 224.0.0.9). Other traffic is considered as non-matching traffic.
6. Creating Matching Profile for range of Multicast IP Address (224.0.0.0 to 224.0.0.255)
IP Address: 224.0.0.9
IP Mask: 255.255.255.255
5.6.2.1.6 Adding Source MAC Address
a. Click Add to add a new entry. The following screen appears.
Figure 5-72 QoS PIR Source MAC address Add Entry
b. All the entries present in the PIR MAC Address Entries are displayed in the MAC Address Entry Table. Select the
appropriate radio button and click Add. After adding the entry for this specific PIR, it is displayed in the Existing
MAC Address Entries table. For deleting an entry, click Delete for the corresponding entry in the PIR Details page.
5.6.2.1.7 Adding Destination MAC Address
a. Click Add to add a new entry. The following screen appears.
Figure 5-73 QoS PIR Destination MAC address Add Entry