Software Guide

Advanced Configuration
Tsunami
®
800 & 8000 Series - Software Management Guide 167
:
·
RADIUS configuration is applicable only when the VLAN Status is disabled on the SU.
·
Local VLAN configuration takes priority over RADIUS Based VLAN configuration.
·
When the link is down, the configuration received from the RADIUS is lost.
Management Attribute VLAN ID 8 Decimal 1 – 4095
Management VLAN Priority 9 Decimal 0 – 7
VLAN Ethernet 1 Trunk IDs 1 to 16 10 … 25 Decimal 1 – 4095
SU VLAN Table Status
(Applicable only to MP/QB.11devices)
26 Decimal 1 – enable / 2 – disable / 3 – delete
Service VLAN ID (Q-in-Q) 32 Decimal 1 – 4095
Service VLAN Priority (Q-in-Q) 33 Decimal 0 – 7
QoS Class Index 34 Decimal 1 – 8
QoS Class SU Table Status 35 Decimal 1 – Enable / 2 – Disable
Ethernet 2 VLAN Mode 40 Decimal 1 – Transparent Mode
2 – Trunk Mode / 3 – Access Mode
Ethernet 2 Access VLAN ID 41 Decimal 1 – 4095
Ethernet 2 Access VLAN Priority 42 Decimal 0 – 7
VLAN Ethernet 2 Trunk IDs 1 to 16 43 … 58 Decimal 1 – 4095
Double VLAN (Q-in-Q) Status 59 Decimal 1 – Enable / 2 – Disable
Serviceably TPID (Q-in-Q) 60 Decimal 1 - InnerTag / 2 - Outer Tag
Ethernet 1 Port VLAN ID 61 Decimal 1 – 4095
Ethernet 1 port VLAN Priority 62 Decimal 0 – 7
VLAN Ethernet 1 Allow Untag Frames 63 Decimal 1 – Enable / 2 – Disable
Ethernet 2 Port VLAN ID 64 Decimal 1 – 4095
Ethernet 2 Port VLAN Priority 65 Decimal 0 – 7
VLAN Ethernet 2 Allow Untag Frames 66 Decimal 1 – Enable / 2 – Disable
VLAN Ethernet 1 Allow Untag Management 68 Decimal 1-Enable
2-Disable
VLAN Ethernet 2 Allow Untag Management 69 Decimal 1-Enable
2-Disable
Name of the attribute Vendor
Assigned
Attribute
Number
Attribute
Format
Attribute Value