Software Guide

Basic Configuration
Tsunami
®
800 & 8000 Series - Software Management Guide 46
After configuring the required parameters, click OK and then COMMIT.
: Reboot the device, if any of the parameters with an asterisk symbol are configured.
Legacy Mode By default, this parameter is disabled. When enabled, the MP 800 & 8000 BSU and SU
devices can interoperate with the legacy products of the Tsunami
®
MP.11 family.
The MP 800 & 8000 devices that provide legacy support are,
·
MP-8100-BSU
·
MP-8100-SUA
·
MP-8150-SUR
·
MP-8150-CPE
·
MP-8150-SUR-100
·
MP-8200-BSU
·
MP-8250-BS9
·
MP-8250-BS1
·
MP-8200-SUA
·
MP-8250-SUR
·
MP-825-CPE-50
·
MP-825-SUR-50
+
·
MP-820-BSU-100
·
MP-820-SUA-50
+
: MP 800/8000 BSU device in legacy mode can connect to a MP 800/8000 SU
device only when configured in legacy mode.
IP Configuration, and
Default Gateway IP
Address
See
      I
.
Parameter Description