Manualshelf

Software Guide

ManualsBrandsProxim Wireless ManualsElectronics802.11 a/b/g/n Mini-PCI module
51525354555657585960
Advanced Configuration
Tsunami
®
800 & 8000 Series - Software Management Guide 57
Figure 5-7 IP Configuration (Routing Mode)
Given below is the table which explains the method to configure IP parameters in Routing mode:
Parameter Description
Ethernet (Please note that the number of Ethernet interfaces depend on your device.)
IP Address Represents the IP address of the Ethernet interface.
By default, the static IP address for Ethernet1 is set to 169.254.128.132 and for Ethernet2
it is set to 169.254.129.132. You can manually change the IP address.
Subnet Mask Represents the subnet mask of the Ethernet interface.
By default, the static subnet mask is set to 255.255.255.0. You can manually change the
subnet mask.
Wireless
IP Address Represents the IP address of the wireless interface.
By default, the static IP address is set to 169.254.130.132. You can manually change the IP
address.