Software Guide

Advanced Configuration
Tsunami
®
800 & 8000 Series - Software Management Guide 184
Figure 5-105 WORP Intra Cell Blocking MAC Table
5.10.6.2.1 To add MAC addresses, click Add. The following screen appears.
Figure 5-106 WORP Intra Cell Blocking MAC Table Add Entry
Given below is the table which explains the WORP Intra Cell Blocking MAC Table entries and the method to configure the
configurable parameter(s):
After adding the MAC address, click Add.
Parameter Description
MAC Address Represents the MAC address of the SU.
Group ID’s 1 to 16 By default, a Group ID is disabled meaning which the SU is not a part of that group. To
make it a part of that group, select Enable.
Entry Status If SU is part of a group and its Entry Status is enabled then it can communicate with all the
SUs belonging to that group. If Entry Status is disabled, then the communication is
blocked.