Software Guide

Management
Tsunami
®
800 & 8000 Series - Software Management Guide 207
Figure 6-17 Retrieve Config Profile File via TFTP
After excluding the unique parameters, click Create Profile for creating the profile and then click Retrieve.
When the retrieved configuration profile file is loaded on the target devices, the target devices will come up with
configuration of the master device except the excluded parameters. The excluded parameters are retained as
configured on the target device.
5. Click Retrieve. The retrieved file can be found in the TFTP Server folder.

Config Profile is applicable only to the compatible devices.

When the device is running with default factory settings, there is no Binary Configuration file present and hence it
cannot be retrieved.

Similarly, the Text Based Template Configuration file does not exist if it is not generated from the CLI.

You can retrieve Event Logs only when they are generated by the device.

Retrieval of license info file (CLI/Web Interface/SNMP) is supported only by MP-820-BSU-100, MP-820-SUA-50
+
,
MP-825-SUR-50
+
, and QB-825-LNK-50
+
devices.

For more information on license upgrade, refer
)      
'
    (       ( A  
and
'
    (  )      
sections.
6.3 Services
The Services tab lets you configure the HTTP/HTTPS, Telnet/SSH and SNMP interface parameters.
6.3.1 HTTP/HTTPS
To configure HTTP/HTTPS interface parameters, navigate to MANAGEMENT > Services > HTTP / HTTPS.