Manualshelf

Software Guide

ManualsBrandsProxim Wireless ManualsElectronics802.11 a/b/g/n Mini-PCI module
12345678910
Advanced Configuration
Tsunami
®
800 & 8000 Series - Software Management Guide 176
The Advanced Filtering table contains a list of 5 pre-defined protocols on which Advanced Filtering is applied. The following
table explains the Filtering table parameters:
:
The Advanced Filtering table contains a maximum of 5 pre-defined IP protocols.
User-defined IP protocols cannot be added to the Advanced Filtering table.
5.10.3.1 Edit Advanced Filtering Table Entries
To edit Advanced Filtering table protocols, click Edit in the Advanced Filtering screen. The Advanced Filtering - Edit
Entries screen appears.
Parameter Description
Protocol Name Represents the protocol name. By default, Advanced Filtering is supported on the
following 5 default protocols:
Deny IPX RIP
Deny IPX SAP
Deny IPX LSP
Deny IP Broadcasts
Deny IP Multicasts
Direction Represents the direction of an IP Protocol traffic that needs to be filtered. The directions
that can be filtered are,
Ethernet to wireless
Wireless to ethernet
Both
Entry Status The filters are applied on the IP protocol only when Entry Status is enabled.