Software Guide

Monitor
Tsunami
®
800 & 8000 Series - Software Management Guide 235
Figure 7-13 An Example - SU Link Statistics (For All Devices)
Given below is an explanation to each of these parameters:
Parameter Description
SU Name/
End Point B Name
Represents the name of the SU/End Point B connected to a BSU/End Point A respectively.
MAC Address Represents the MAC address of the SU/End Point B connected to a BSU/End Point A
respectively.
Local Tx Rate (Mbps) Represents the data transmission rate at the local (current device) end.
Remote Tx Rate
(Mbps)
Represents the data transmission rate at the remote (peer) end.
Local Antenna Port
Info
Indicates the status of the antenna ports at the local end. The following symbols indicate
the status of the antenna ports.
Local Tx Antenna Port
Info
Indicates the status of the antenna ports at the transmitting end. The following symbols
indicate the status of the antenna ports.
Local Rx Antenna Port
Info
Indicates the status of the antenna ports at the receiving end. The following symbols
indicate the status of the antenna ports.
Indicates the antenna port is disabled.
Indicates the antenna port is enabled and signal is present.
Indicates the antenna port is disabled.
Indicates the antenna port is enabled and signal is present.
Indicates the antenna port is disabled.
Indicates the antenna port is enabled and signal is present.