Software Guide

Monitor
Tsunami
®
800 & 8000 Series - Software Management Guide 256
7.11.2 Scan Tool
With Scan Tool, you can scan all the Proxim devices available on the network.
To scan the devices, navigate to MONITOR > Tools > Scan Tool. The Scan Tool screen appears. In the Scan Tool screen,
select Scan Mode as IPv4. Click Scan to scan and refresh the devices on the network. The scanned devices are displayed as
shown below:
Figure 7-39 An Example - Scanned Devices (IPv4)
In the Scan Tool screen, select Scan Mode as IPv6 to scan the 82x devices with IPv6 mode. Click Scan to scan and refresh
the devices on the network. The scanned 82x devices are displayed as shown below:
Figure 7-40 An Example - Scanned Devices (IPv6)
: ScanTool IPv6 support is applicable only for the 82x devices with IPv6 mode.
7.11.3 sFlow®
Proxim’s point-to-multipoint and point-to-point devices support sFlow® technology, developed by InMon Corporation. The
sFlow® technology provides the ability to measure network traffic on all interfaces simultaneously by collecting, storing, and
analyzing traffic data.
Depicted below is the sFlow architecture that consists of a sFlow Agent and a sFlow Receiver.